CrimeStopper SP-402 Instructions d'exploitation télécharger pdf (Page 6)

OPERATING INSTRUCTIONS - ALARM

REMOTE PANIC PROTECTION

To sound the alarm in an emergency or to draw attention to your vehicle, press and hold the Lock button for at

least 3 seconds until the siren / horn sounds. Press the Unlock button to reset panic mode. The LCD display

will flash most of the icons and emit 10 beeps when the Panic Mode is triggered.

TRUNK / HATCH POP (Optional, Remote AUX. 1 Output)

This feature is designed to interface with existing Factory power trunk or power hatch release systems and

may require additional parts and/or labor charges. To eliminate the possibility of accidentally opening the

trunk, there are (3) options for button press selection. This option will allow you to change whether the Remote

starter and Trunk release activate by a:

1. Double button ½ second presses.

2. Single ½ second press. *Default = Single ½ second press*

3. Press and Hold 2 seconds. This output stays on until trunk button is released.

REMOTE AUX. 1 thru Data module for sliding doors only

This feature requires a Databus module to operate.

Press Trunk plus Lock at same time to activate Aux 1.

REMOTE AUX. 2 Output (Optional, requires special programming)

This system contains a 2

Auxiliary output to activate other accessories or devices. This

momentary output will stay active as long as the remote button is held down. There is no LCD /

Pager confirmation for Aux. 2 output. To activate the 2

Auxiliary output:

Press the Trunk and Unlock button for more than 2 seconds.

REMOTE AUX. 3 Output (Optional, requires special programming)

This system contains a 3

Auxiliary output to activate other accessories or devices. This output

is programmable for a momentary, timed or Latch output. To activate the 3

auxiliary Output:

Press the Trunk and Start Button at the same time.

REMOTE AUX. 4 Output (Optional, requires special programming)

This system contains a 4

Auxiliary output to activate other accessories or devices. This output

is programmable for a momentary, timed or Latch output. To activate the 4

auxiliary Output:

Press the Lock and Start Button at the same time.

Plus

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

CrimeStopper SP-402 Instructions d'exploitation Page 6